Quantcast
Channel: Dodge Cummins Diesel Forum
Browsing all 43078 articles
Browse latest View live
↧

stock tires howling

I have had my truck for exactly one week, stock tires ( 265 70R 17 bfgoodrich trail) when i get on the throttle with the windows up or down it sounds like my left (possibly right too) rear tire is...

View Article


no cam signal?

just got done p-pumping my '02 (almost) it fires, sounds like an old vintage tractor, might still have some fuel line bleeding to do, or a timing adjustment, but i don't want to run it till i replace...

View Article


turbo experience?

so far ive got an afe intake,southbend dual disc,airdog 150,and a smarty.my next mod is going to be a turbo.ive been looking at the s400 (71mm/74mm) series borg warner turbos and the industrial...

View Article

Factory Smoked Headlights 03-05 100$shipped

Factory smoked headlights for an 03-05. These are not painted and are not unbearable to see out of. I have ran them for 2 years, they are in good working condition. I just like the looks of the halo's...

View Article

superchip tuners cummins dmax powerstroke new

ive got a couple superchip flashpaq diesel tuners. 1 for 99-07 cummins 2 for 99-07 powerstrokes 2 for 01-07 duramax and 1 07.5-08 duramax all are brand new in the boxes never used. $200 a piece takes...

View Article


Simms Rivertek BOA wading boots

I have a pair of these awesome wading boots that have only been on my feet 2 times, I made the mistake of buying them a half size too small as I later found out. They don't hurt me feet at all just...

View Article

smarty jr install - Gone Bad. need HELP

a buddie of mine is trying to do a install (smarty jr) on a 07 6.7 cummins. i couldnt help much since i drive a 5.9 and wasnt around for the install. but im tryin to help - so here it is. He is getting...

View Article

Image may be NSFW.
Clik here to view.

Turbo flanges hx35

Looking for some flanges to help a buddy weld up some new twin piping, just can't find exactly what I'm looking for. Called acouple of people but no one seems to know exactly how to classify flanges in...

View Article


Mold line in trans seeping fluid..What should i do?

i was on my way home from work today and my trans slipped when i turned the corner..i immediately pulled over to check fluid and noticed a steady drip which looked to be coming from the rear trans...

View Article


goin' a bit crazy...

my tranny was recently built and its working well except one big issue. if i romp or roll into it from a stop everything works as it should, shift solid and holds gears a bit longer. problem is when...

View Article

Edge Comp And Scan Gauge

Hey guys, i have a scangauge on my truck and when i have it on setting to watch boost through the computer, i am a little puzzled, i guess i do not fully understand what boost fooling really does. I...

View Article

24v head on my 97

So I have a guy that is willing to trade a 24v head for my piller gauges my question is what is the benefit of having it and what parts will I need to do the conversion or is it even worth my time Sent...

View Article

borg warner s480

s480 borg warner t6 flange 1.32ar believe its a bullseye turbo like new condition probly 1500 miles or so used in twin setup went back to single dont need it sitting in the garage taking up space $1250...

View Article


Image may be NSFW.
Clik here to view.

74/68/14 II turbo and twin piping 5in down pipe.

I got a industrial Injection Pulling turbo its a 74/68/14 was going to run it in a twin setup but changed my mind just going to stay with a single and this is to big. Now for the twin piping was for a...

View Article

Image may be NSFW.
Clik here to view.

Schied Reman 04.5-07 Dodge 200HP Injectors

I have a set of injectors that was built by Schieds with 200hp nozzle on them and flow tested. Never installed. Reman Injectors were bought from Schieds and then 200hp nozzles added to them and tested....

View Article


Inspection Day...

Please let me know of any good places around Ft Bend County to get my inspection done...PM's are more than acceptable. Thanks!

View Article

cab option

I found a cab for my 94 1 ton. It's off a 2000 1500 it's in fairly good shape the dash is immaculate but the seats and rockers are gone. How much work would it take to swap the cab onto my truck?

View Article


NE: 1991 dodge w250 4x4 nonintercooled

its all here on the craigslist 6,000 obo norfolk nebraska 1991 Dodge 2500 Cummins

View Article

68RFE core needed asap!!

Anyone out that have a 68RFE core for sale? It does not have to be functional, just ok hard parts.

View Article

Image may be NSFW.
Clik here to view.

CA: 94 rclb underdrive with a pto

1994 dodge reg cab with a camper sit up to 6 people 5.9cumming automatic transmission and underdrive with a pto call 951 306 9201

View Article
Browsing all 43078 articles
Browse latest View live