can anyone ID these fenders?
can anyone ID these fenders or tell me whos truck this is? im not a huge fan of the body lines associated with fiberwerx and glass works stuff
View ArticleDrive shaft
I have a front drive shaft off an automatic $120 obo. I would also trade this for a front drive shaft off a NV5600.
View Articlewhat size tire can i put on a standard truck
hi guys ive been searching the forum for a while now and keep getting conflicting stories about what can be put on a standard truck. I have no lift what so ever and have an ARB bull bar with 15000lbs...
View ArticleInjectors!
Looking for some decently priced 90 or 100HP injectors for my 98 12v Email me a 12vBrandon@gmail.com please no PMs
View ArticleMoving from California!
Hey all! Finally getting out of the "wonderful" state of California and moving to North Carolina in about 5 months! Moving to the Asheville area. What are some of the vehicle laws out there I'm sure...
View ArticleHigh Beam + Fog light ON mod. Easy/Cheap/Free
I always forget about my fog lights then when I'm almost to my destination I remember them, turn them on, and kick myself until I arrive for not turning them on sooner.:banghead: I finally figured out...
View Article35 inch tires. Performance decrease?
Okay so I gotta ask this question. My 35 inch nitto trail grapps are waiting in the city for me to pick them up along with some 17 inch Mickey Thompson rims. I know they will probably decrease my...
View ArticleCA: 1998 Dodge Ram 2500 CCLB 4x4 12 valve NICE
1998 Dodge Ram 2500 Diesel 4x4 12v Cummins. It's the club cab long bed model. This truck was owned by an older gentleman until a couple years ago and is in good condition. This is a no rust California...
View ArticleStumbled upon this, Concerned
I was looking through the 2004.5 manual in the glovebox for no apparent today, and I came upon : cut to... :shock: Do I not have a passenger side airbag?
View ArticleSilicon or Medal elbow?
I have a BorgWarner S300SX3 with a normal Compressor housing. The model is number 177275. My question is should I use the Silicon elbow or get a metal one and vband clamp it to the turbo? The only...
View ArticleRadiator leaking at end tank
I know these radiators are known to leak right where the main body crimps around the plastic end tank. Turns out mine is leaking right from there. I am usually the type of person that when something...
View ArticleAntifreeze Leak after oil change!
Hey guys...need some help. I just purchased an 2004 yesterday,I changed the oil and filter along with the fuel filter. Started truck to check for leaks and after about 2 mins of running I noticed...
View ArticleRocker arm play? Normal?
I took off my valve covers to change the gaskets, and noticed the rocker arms have a lot of side to side play. Is this normal?
View ArticleMega Cab guys with tonneau covers, which one?
Looking at tonneau covers and there is more animosity toward this topic than something like brand x tuner gives me 33.293mpg. :hehe: Seriously, I'm looking for a hard cover that either folds or...
View ArticleRough idle and rpms hard to get up.
Have been working on a 95 12 valve for a bit now. Pulled it out and going to be dropping it in a ford soon. I stripped the motor down to the short block just to inspect everything, replace gaskets and...
View ArticleIs it worth it to....
How hard would it be /could I swap cab and bed and turn my rclb it into a qcsb? The clutch went on my 97rclb. If I replace it im going to do at least a sb3250 and in the mean time im gonna replace my...
View Articleoil line to turbo
Ok guys so I got afass turbo kit from lovefab and in the kit it said to plug the original location that the oil feed line comes from the filter housing to turbo and then take one of the plugs out the...
View ArticleNJ: 2003 QQ/SB 4x4
I have an almost stock 2003 quad cab shortbed automatic with 91900 miles on it. Previous owner put on a set of 315/70 Mickey Thompson MTZ's, probably have another 20,000 miles on them. It has never had...
View ArticleWTB alternator wire harness
i need the wiring harness that goes to the alternator and what ever it hooks up to. pm me or txt me 575 640 3306
View Article