5X0.011 VS 5X0.012 vco injectors
I am going to be in the market for injectors pretty soon and was looking for some opinions. I’m wanting to get the most power I can out of them but not haze at idle or black the sun out. The truck will...
View ArticleUnlock cable required?
I have a 2014 5500 c&c looking to delete. I have an autocal already so I am familiar with efi live just never done a 6.7. Ive read that you have to have an unlock cable to efi and Ive read that...
View ArticleClik here to view.
New Truck!
2018 2500 CTD, SLT, Big Horn, Off Road Pkg. Traded my 2017 F250. So far it has been great! The thing that stands out the most so far is the difference in maneuverability due to the shorter wheel...
View Article68RFE acting weird
Well I got a Randy’s Transmission DIY 700 horse kit (the whole input drum, tc, shaft, etc.) installed in my trans by a very reputable trans shop a month ago. I got everything new including modified vb...
View Article2006 engine rebuild 5.9
rebuilding engine 2006 5.9 when it went to the machine shop there was small plastic plugs in the oil holes under the main bearings when it came back they were not there, the oil holes go through the...
View ArticleHelp with turbo and programmer
I have a 2nd gen 3500 2wd that is my daily driver. The truck is fully loaded (11,520 lbs) all the time as it is my welding rig and my ride everywhere I go. I also have a tool trailer that I pull from...
View ArticleYear information
Hey guys, I’ve been doing a lot of research into the auto to manual swaps, pros and cons and so forth. However I do have a question, I own a truck that has a manufacturing date of 10/04. Is it possible...
View Article2018 Ram 2500 Leveling kit
Hey guys. I am looking to level my ram 2500 4x4. I was loking into it and wondering if I need to get an adjustable track bar as well. My local guy who is going to put it on says no but I have seen...
View ArticleNeed 1992 Electronic Control Module (ECM)
The voltage regulator inside the ECM of my 92 seems to have gone bad and I am having a hard time finding a replacement ECM. 2 used and 2 rebuilt units have not worked and been returned. Anybody know...
View ArticleClik here to view.
NEED HELP - shock install-busted bolt in San Diego
I was replacing my shocks and managed to bust off one of the bolts/studs that secures driver's side shock tower. Anyone know how to replace? Or what exactly it is - captured bolt/welded stud -...
View ArticleSupplier Discount - Is it the best you can do?
I can get the supplier discount on a Ram; which I know is 1% under invoice, but is really that the best way to buy a new Ram, or could I do as good or better by waiting for the right dealer and putting...
View Article2012 dodge 2500 6.7
Hello guys I need some help. I have a 2012 dodge 2500 not deleted. I got into my truck today and went to put it into drive and it automatically went into Manuel mode first gear. I can't switch gears...
View ArticleIn-Frame Rebuild Kits
What's everyone's experiences with rebuild kits without pulling the motor completely? I want to do compression and blow-by test before the tear down, anything else I can look for? I had several...
View Article2014 6.7L raceme ultra tuner
I have a 2014 3500 with a raceme ultra tuner. I am looking at buying a 5â stainless steel, straight pipe exhaust system. What are some decent online companies that are good to go through? Any...
View Article99 24v tach works then drops to zero after start up
I need some serious help I’ve replaced both crank sensor and the cam sensor and tach still works on start up but then drops to zero I’m about had it with this truck
View Article99 24v tach works then drops to zero after start up
I need some serious help I’ve replaced both crank sensor and the cam sensor and tach still works on start up but then drops to zero I’m about had it with this truck
View ArticleHelp choosing a secondary over a s480
I need help deciding on a secondary t4 charger. I ran a 64/71/14 over s480 on an old setup and it ran good. The engine is now rebuilt and built to handle some power. Kind of have have my eye on a...
View ArticleClik here to view.
Error code help
Trucks a 98 12v auto seems like it starts in 2nd or 3rd if i manually shift the truck I get 2nd and 3rd and od but stays in 2nd when i shift to 1st these are the codes that came up P0122 P0123 P1762...
View ArticleLevel kit vs Swaybar vs end link position.
Well. 1994 old school swaybar and end links , aka not modern 01 and up configure. Trying to put steering brace and sway bar back on my cons 1994 . It's has 1 1/4" level rubber looking block. If I...
View Article
