Need a quote
ISSPRO EV2 Gauges (White Face, chrome Bezel, Blue Pointer) -Pyrometer (0-1600) -Trans Temp -Boost (0-60 psi) -A pillar 3 pod mount -Boost bolt 03-09 dodge ram Sent from my iPhone using AutoGuide.com App
View ArticleWipers moving in reverse after motor replacement
Here is what happened. 1. Wiper motor park sensor failed a few months ago so they were parking high. 2. Multi-function switch started to act up and despite my attempts to repair it, it was toast 3. I...
View ArticleWTB Fuel Plate
Would really like a cheap fuel plate of any kind. My truck didn't have one in it when I bought it, so a stock one would be fine too Sent from my ADR6350 using AutoGuide.Com Free App
View ArticleFront drive/prop shaft uj help!
Long story short what stops the axle uj from Silding side to side? All the straps seem to to is secure it But what locates it correctly? I fitted a fromt prop to my truck carefully went for a test...
View ArticleEngine knock on #1 piston any ideas
I have a 2003 dodge ram 2500 I purchased with a knock and I thought it was a bad injector. I removed the valve cover and started the truck and removed one wire from each injector one at a time. When I...
View ArticleDD nv4500 clutch
Truck in sig, being built for 600hp, engine coming apart this month. Truck sees street daily driving about 90% of the time, light off roading, if towing its no more than 10k. Stock nv4500, no upgrades...
View ArticleTiming Question
What timing is best for maximum mileage? And are there any drawbacks to advanced timing? I have heard everything from 17°-23° is optimal. Feed back please. My truck will tow occasionally, but a...
View ArticleBd exhaust brake vacuum lines help!
So im trying to figure out how to install my exhaust brake and I'm having trouble finding the vacuum line to splice into for the brake. Where is this line located? Pics would be helpful! Thanks guys
View ArticleHow does the Trans, drive line, an rear end hold up
Just curious with the few mods I've done this truck holds up not sure what kinda things you seasoned 6.7 guys might have run into appreciate it guys
View ArticleGas NV4500 Questions
First, my appoligies if this has been covered before.. my searchs havent came up with any answers to my questions so I thought I would just out right ask. I have a 1999 Dodge 2500 24v auto 4wd, I lost...
View ArticleDiscontinued sales to private sector.
Has anyone heard the rumor that is being run through the Chevy camp? Drinking beer at a buddy's house tonight, he is a sales manager at the local Chevy dealership, he stated that it is being discussed...
View Articlemod friendly dealers in az?
anyone know of any mod friendly dealers in AZ? and who did you speak with there, and when did you speak with them? Were they willing to put it on paper?...talk is cheap.
View ArticleDiesel Tech in Washington Beaver or Allegheney county
Anyone know a diesel tech that would be up for flashing my ECM for some cash on the side, all the dealers I called want $100 or more to do it. I live in Beaver County buy spend more time in Washington...
View Articletransmission heat exchanger
So I want to remove my heat exchanger for my transmission. I am wondering what all would be needed to remove it. Including hoses and fitting on both the transmission lines and the engine coolant line...
View ArticleP0216 p0251 p1688 and p1699
My truck threw these codes just now ran fine up until about half hour ago started running very rough had no power and now will not start I replaced the fuel filter about a month ago I am pretty sure my...
View ArticleIS This a Easy job?
Dont like the gearing on my 3500, Its a dually 6spd. manual, I know there made to be like this, but I hate that the gears are so short and it doesnt like pushing itself over 70 on the highway. I think...
View ArticleGetrag drain plug rounded-out
Attempted a Getrag gear oil change; found the 3/8" socket drive drain plug rounded out, so I can't remove it. Tried pliers on the outside, it's too tight. Tried pounding-in a Torx T-50 with no luck....
View ArticleCummins Shows Chevy Who's Boss.
You Tube You Tube Check this out. Died laughing first time I saw it lol.
View Articlesold truck lots of parts f/s
Sold my truck bought a new one. New truck has all these parts in it all ready. So selling stuff I bought off here new and taking off the new truck. Apr head studs. Bought from a guy on here. He said...
View Article