I have been running out of diesel at either 1/8 or 1/4 tank. Never consistent so I have to start looking for fuel at 1/2 tank to make sure I don't run out which I occasionally would. Turns out my module was broken (cracked) in half and zip tied together when my suction line and raptor 150 were put in. My suction line was a fuel line zip tied to the bottom of my broken module fed from a bung in the front of the tank laying on its side, possibly, not knowing what happens in the tank when you put it back together.
The crack is probably why I run out at different levels due to some flex in the body causing the float to be off.?. Or the suction line is drawing air by not being on the bottom of the tank.?. I want my gauge to be right.
So, I'm looking for a fuel module that will work in my 35 gallon tank. Who has the best price? Do I go Vulcan ($300} or modify a unit from elsewhere?
Thank You
The crack is probably why I run out at different levels due to some flex in the body causing the float to be off.?. Or the suction line is drawing air by not being on the bottom of the tank.?. I want my gauge to be right.
So, I'm looking for a fuel module that will work in my 35 gallon tank. Who has the best price? Do I go Vulcan ($300} or modify a unit from elsewhere?
Thank You