I rotated the barrels on my truck and had all of them within 5 degrees of eachother except one cylinder so i shut the truck off and adjusted that barrel back slightly tightend everything up and now it wont start.
i tried loosening the bleeder screw on top of the fuel filter housing and manually pumping the lift pump and got fuel coming out of there, i also tried manually lifting the fuel shut off on the truck to remove doubt that it wasnt coming up and even with manually pulling it up it still wont start.
i loosend the number one injector line at the delivery valve holder to see if there was fuel coming out when cranking but there isnt,but you can visually see fuel in the barrel.
any ideas?
i tried loosening the bleeder screw on top of the fuel filter housing and manually pumping the lift pump and got fuel coming out of there, i also tried manually lifting the fuel shut off on the truck to remove doubt that it wasnt coming up and even with manually pulling it up it still wont start.
i loosend the number one injector line at the delivery valve holder to see if there was fuel coming out when cranking but there isnt,but you can visually see fuel in the barrel.
any ideas?